Paper quilling may be a sort of art that’s done by cutting paper into long thin strips, then the paper strips are formed in several shapes by rolling and pinching the pieces, then adding glue to the shapes together which can make very decorative art. Paper quilling is usually obtained for illuminating cards, gift packets, gift backpacks, picture racks, or making 3D standalone art pieces, which can bring about everybody in wonder. The benefits of doing this are often the expansion of attention. You can do that to ease your mind and deduct stress. Today you’re getting to make a number of the important flower shapes which are required for quilling. So, follow the method, note the names, and Let’s begin!
How to Make Paper Quilling Flowers- Part 8
Materials:
- Quilling pen.
- Circle sizer.
- Quilling strips.
- Quilling Comb
- Border buddy ( circular shape)
- Craft Glue.
Procedure:
First flower:
- Grab a quilling strip and a quilling pen, roll the strip into the quilling pen.
- Pull off the coil after rolling it.
- Put up with a circle sizer, put the coil into a small shape circle.
- Pull the coil out.
- Before secure, take it to lose and don’t apply glue.
- Dab the upper part a little to open it more.
- Apply glue and secure the end.
- Follow these processes and make four of them. We will need a total of five of these.
- Grab another colour quilling strip and a quilling pen, roll the strip into the quilling pen.
- Pull off the coil after rolling it.
- Put up with a circle sizer, put the coil into a small shape circle.
- Pull the coil out.
- Pertain glue at the end of the strip to properly secure it.
- Take all petals, and stick them together by putting the coil in middle with craft glue
- The first flower will be done!
Second flower:
- Take a quilling comb and a paper quilling strip, secure the strip inside the fourth pole of the comb with glue.
- Stick glue on the top of the strip then takes the strip on the pole above and bottom.
- Again take the strip one pole down and up until the strip is over.
- Secure the end of the strip with glue after the petal is done.
- Slowly remove the petal from the comb and also cut the extra parts.
- Hold the petal from the middle and stick glue on the tip of the petal.
- Apply glue on the outside of the petal’s bottom then take another colour paper quilling strip.
- Bind the strip over the petal.
- Secure the end of the strip with glue.
- Follow these processes and make four of them. We will need a total of five of these.
- Take all petals, attach them sidewise with glue.
- Your second flower shape will be formed!
Third flower:
- Take two quilling strips and a border buddy, take one strip and bind it on the first step of the border buddy and secure the tip with glue before binding it, then bind it.
- After that take out the strip from the border buddy, then pinch one side of it. Giving it a teardrop shape.
- Take another colour strip, fold it in half then torn it into two pieces.
- Bind two pieces into the top part of the border buddy, and secure the tip with glue before binding it, then bind it.
- Take out the strips from the border buddy, then pinch one side of them. Giving them a teardrop shape.
- Put glue inside of the previous teardrop and put the smaller teardrops inside them in the bottom together.
- Put glue on the shape’s rest inside part.
- Grab a quilling strip and a quilling pen, roll the strip into the quilling pen.
- After the roll come to the middle of the strip lose it and then do the same with the rest of the part. which will give a curved scroll.
- Put the curved scroll on the shape you made previously.
- Grab a quilling strip and a quilling pen, roll the strip into the quilling pen. Make two small coils with it by tearing the strip from the trip a little.
- Put the coils inside the previous shape’s teardrops.
- Follow these processes and make four of them. We will need a total of five of these.
- Take all petals, attach them sidewise with glue.
- Your third flower shape will be formed!
Fourth Flower:
- Take a quilling comb and a paper quilling strip, secure the strip inside the middle of the two-pole of the comb with glue.
- Stick glue on the top of the strip then takes the strip on the pole above and bottom.
- Again take the strip one pole down and up until the strip is over.
- Secure the end of the strip with glue after the petal is done.
- Slowly remove the petal from the comb.
- Put glue on the first part of the strip’s curve.
- Fold it inward and pinch it on the top.
- Apply glue on the top to keep the sights together.
- Apply glue on the outside of the petal then take another colour paper quilling strip.
- Bind the strip over the petal.
- Secure the end of the strip with glue.
- Follow these processes and make four of them. We will need a total of five of these.
- Grab a quilling strip and a quilling pen, roll the strip into the quilling pen.
- Pull off the coil after rolling it.
- Take a circle sizer, put the coil into a small circle shape.
- Pull the coil out.
- Pertain to glue at the top of the strip to properly secure it.
- Take all petals and the tight coil put the petals on the sides of the middle tight coil.
- The fourth flower will be done!
These are some flower shapes of quilling. Commemorate them and apply them to your work!