Basic Flowers – Part VII

Paper quilling may be a sort of art that’s done by cutting paper into long thin strips, then the paper strips are formed in several shapes by rolling and pinching the pieces, then adding glue to the shapes together which can make very decorative art. Paper quilling is usually obtained for illuminating cards, gift packets, gift backpacks, picture racks, or making 3D standalone art pieces, which can bring about everybody in wonder. The benefits of doing this are often the expansion of attention. You can do that to ease your mind and deduct stress. Today you’re getting to make a number of the important flower shapes which are required for quilling. So, follow the method, note the names, and Let’s begin!

How to Make Paper Quilling Flowers

Materials:

  • Quilling pen.
  • Circle sizer.
  • Quilling strips.
  • Border buddy
  • Quilling crimper
  • Craft Glue.

Procedure:

First flower:

  • Grab a quilling strip and a quilling pen, roll the strip into the quilling pen.
  • Pull off the coil after rolling it.
  • Put up with a circle sizer, put the coil into a small shape circle.
  • Pull the coil out.
  • Pertain glue at the top of the strip to properly secure it.
  • Take half of a paper quilling strip and a quilling pen, roll the strip into the quilling pen.
  • Pull off the coil after rolling it.
  • Put up with a circle sizer, put the coil into a smaller shape circle than the previous coil.
  • Pull the coil out.
  • Pinch one side of the coils, give them a teardrop shape.
  • Follow these processes and make four big and small of them. We will need a total of five of these.
  • Take all the bigger coils and attach them with glue sidely.
  • Take the smaller coils and put them on top of the bigger coils layer with glue.
  • The first flower will be done!

Second flower:

  • Take a circle shape border buddy and a quilling strip, take the strip and bind it into the first step of the circle shape border buddy.
  • After binding it properly attach the tip with glue to the border buddy.
  • Pertain glue to the end of the strip to secure it, then pull it out from the border buddy.
  • Take the circle shape and pinch it from a side and then bend its tip, which will give it a bend teardrop shape.
  • Apply glue inside of the bent teardrop.
  • Grab a quilling strip and a quilling pen, roll the strip into the quilling pen.
  • After the roll come to the middle of the strip lose it and then do the same with the rest of the part. which will give a curved scroll.
  • Put the curved scroll on the shape you made previously.
  • Follow these processes and make two of them. We will need a total of three of these. Among them, one will be teardrop and two bent teardrops. ( A teardrop will be done by only pitching one side)
  •  Take the petals, apply glue on the bottom of the teardrop shape and put the bent teardrops over the sides of it to attach.
  • Your second flower shape will be formed!

Third flower:

  • Take a quilling crimper and a paper quilling strip, crimp the strip in it.
  • Take a quilling pen and the crimped strip, then slowly roll it into the quilling pen.
  • Pull off the coil after rolling it.
  • Put up with a circle sizer, put the coil into a big shape circle.
  • Pull the coil out.
  • Pertain glue at the top of the strip to properly secure it.
  • Apply on the outside of the coil.
  • Take another colour quilling strip and bind it over the coil.
  • Pertain glue on the end of the strip to secure it.
  • Pinch one side of the whole shape to give it a teardrop shape.
  • Follow these processes and make four of them. We will need a total of five of these.
  • Take all petals, and stick them together with craft glue sidely.
  • Your third flower shape will be formed!

Forth flower:

  • Take three different colour paper quilling strips, the size should be 8mm,5mm and 3mm.
  • Attach the 8 mm strip on the edge of the 5 mm paper quilling strip with glue.
  • Attach the 5 mm strip on the edge of the 3 mm paper quilling strip with glue
  • Small cuts throughout the whole strip with a scissor.
  • Take the whole strip and a quilling pen,  roll the strip into the quilling pen.
  • Pull off the coil after rolling it.
  • Pertain glue at the end of the strip to properly secure it.
  • Take the piece down, push the top to open the finches on both layers.
  • Take the quilling pen to give it a shape.
  • Your fourth flower shape will be formed!

These are some flower shapes of quilling. Commemorate them and apply them to your work!


Posted

in

by

Tags: