Paper quilling may be a sort of art that’s done by cutting paper into long thin strips, then the paper strips are formed in several shapes by rolling and pinching the pieces, then adding glue to the shapes together which can make very decorative art. Paper quilling is usually obtained for illuminating cards, gift packets, gift backpacks, picture racks, or making 3D standalone art pieces, which can bring about everybody in wonder. The benefits of doing this are often the expansion of attention. You can do that to ease your mind and deduct stress. Today you’re getting to make a number of the important flower shapes which are required for quilling. So, follow the method, note the names, and Let’s begin!
How to Make Paper Quilling Flowers- Part 9
Materials:
- Quilling pen.
- Circle sizer.
- Quilling strips.
- Quilling Comb
- Craft Glue.
Procedure:
First Flower:
- Grab a quilling strip and a quilling pen, roll the strip into the quilling pen.
- Pull off the coil after rolling it.
- Put up with a circle sizer, put the coil into a small shape circle.
- Pull the coil out.
- Pertain glue at the top of the strip to properly secure it.
- After you have done quilling, take the coil pinch a side of it to make a teardrop shape.
- Pull out the middle part of the coil with your hand push it upwards. This will create a 3D shape.
- Put glue on the upper lifted part of the strip and spread it with your fingers.
- Follow these processes and make five of them. We will need a total of six of these.
- Grab a quilling strip and a quilling pen, roll the strip into the quilling pen.
- Pull off the coil after rolling it.
- Take a circle sizer, put the coil into a small circle shape. It will be a tight coil.
- Pull the coil out.
- Pertain to glue at the top of the strip to properly secure it.
- Take all petals and the tight coil put the petals on the sides of the middle tight coil.
- The first flower will be done!
Second flower:
- Take a quilling comb and a paper quilling strip, secure the strip on the twelfth pole of the quilling comb. And put it inside forth poles to make it wider.
- Take the strip upper and under a pole then downward, and also in the bottom part.
- Repeat these on all that strip, keep the strip the poles on top to make it more beautiful.,.
- Secure the end of the strip with glue after the petal is done.
- Slowly remove the petal from the comb and also cut the extra parts.
- Hold the petal from the middle and hold it outward and pinch on the top.
- Secure the top with glue by clipping it together.
- Apply glue on the outside of the petal’s bottom then take another colour paper quilling strip.
- Bind the strip over the petal.
- Secure the end of the strip with glue.
- Follow these processes and make four of them. We will need a total of five of these.
- Take all petals, attach them sidewise with glue.
- Your second flower shape will be formed!
Third flower:
- Grab two quilling strips and a quilling pen, roll the strips into the quilling pen.
- Pull off the coils after rolling them. The size will be the same.
- Put up with a circle sizer, put the coils into a big shape circle.
- Pull the coils out.
- Pertain glue at the top of the strips to properly secure it.
- Take a coil and the quilling pen put the pen inside the top layer of the coil.
- Roll the part and push it underneath. This will create a curved teardrop.
- Repeat the same for the other coil as well.
- Pinch the bottom of both coils.
- Put glue on the up parts of the coils and attach them together. It will look like a heart-like shape.
- Take half of a paper colour strip of another colour and bind it to the previous shape.
- Before binding secure the strip on the shape with glue.
- Apply glue on the inside of the strip as well.
- After binding secure, it ends with glue and pushes the middle part to give it a definite shape.
- Follow these processes and make four of them. We will need a total of five of these.
- Take all petals, attach them sidewise with glue.
- Your third flower shape will be formed!
Forth flower:
- Take a paper quilling strip and make a small leaf on the tip by folding.
- Take the strip over this shape and make a leaf bigger than the previous.
- Repeat the step once.
- Take the strip from the side and make a leaf sidewise.
- Do the same on the other side.
- Take the strip sidewise and make ]smaller leaf than the previous on both sides.
- Bind the rest strip on all over the leaves from outside. Secure the end with glue.
- Follow these processes and make four of them. We will need a total of five of these.
- Take all petals, attach them sidewise with glue.
- Your fourth flower shape will be formed!
These are some flower shapes of quilling. Commemorate them and apply them to your work!