Paper quilling may be a sort of art that’s done by cutting paper into long thin strips, then the paper strips are formed in several shapes by rolling and pinching the pieces, then adding glue to the shapes together which will make very decorative art. Paper quilling is usually obtained for illuminating cards, gift packets, gift backpacks, picture racks, or making 3D standalone
art pieces, which can bring about everybody in wonder. You can do that to ease your mind and deduct stress. Today you’re getting to make a number of the important flower shapes which are required for quilling. So, follow the method, note the names, and Let’s begin!
How to Make Paper Quilling Flowers Shape
Materials:
- Quilling pen.
- Circle sizer.
- Quilling strips.
- Quilling Comb
- Border buddy
- Craft Glue.
Procedure:
First flower:
- Grab three different colour paper quilling strips and a quilling pen, take a strip and roll it on the quilling pen to make a coil.
- Pull off the coil after rolling it.
- Grab a circle sizer put the coil into a big circle shape.
- Pull the coil out.
- Put glue at the end of the strip to properly secure it.
- Grab a quilling strip and the quilling pen and roll it on the pen to make a coil.
- Pull off the coil after rolling it.
- Grab a circle sizer put the coil into a small circle shape.
- Pull the coil out.
- Pinch the tip of the coil. It will give it a teardrop shape.
- Roll out one side of it. By not removing the teardrop.
- Bind it again and make a tight teardrop.
- Take the big coil; you make previously, fold it in half.
- Put glues inside it and insert the tight teardrop.
- Put glue on the outside of it, bind the third quilling strip around it.
- Secure the end of it with glue.
- Follow these steps and make four more of these petals. We will need a total of five of these.
- Take the petals, apply glue on the sides of them to attach.
- The first flower will be formed!
Second flower:
- Grab a long quilling strip and a quilling comb put the strip on the first pole and apply glue to secure it.
- Take the strip to the twelfth pole, apply some glue on its tip.
- Take the strip one pole down to the right side, apply some glue on its tip.
- Do the same step on the left side, apply some glue on its tip.
- Take the strip one pole down to the right side, apply some glue on its tip.
- Do the same step on the left side, apply some glue on its tip.
- After it’s done, secure the strip with glue at the back.
- Slowly slide the petal out from the comb.
- Follow these steps and make four more of these petals. We will need a total of five of these.
- Attach each strip with glue on top of each other in the centre.
- The second flower will be formed!
Third flower:
- Grab a circular shape border buddy and a quilling strip, use the bottom of the border buddy apply glue on the tip of the strip and bind the strip on it.
- After the circle is ready, pull it out from the border buddy and pinch it on aside. That will give a teardrop shape.
- Take the border buddy, and a quilling strip use the first step of the border buddy by binding the strip. Before binding it secure it by adding some glue to its tip.
- After the circle is ready, pull it out from the border buddy and pinch it on aside. That will give a teardrop shape.
- Put glue on the inside bottom of the previous teardrop and put this teardrop in it.
- Take a quilling strip and a quilling pen, roll the strip into the quilling pen and lose it before coming in the middle, then do the same. That will make a wave scroll.
- Put the wave scroll between the space of two teardrops. Spead it by removing the hollow spaces.
- Follow these steps and make four more of these petals. We will need a total of five of these.
- Take the petals, apply glue on the sides of them to attach.
- The third flower will be formed!
Forth flower:
- Grab four different colour paper quilling strips. Take them and a quilling pen, roll the strips into the quilling pen to make a coil.
- Pull off the coils after rolling them.
- Grab a circle sizer put the coils into it from the small to big different shaped. The smallest coil will be made with a half strip.
- Pull the coils out.
- Put glue at the end of the strips to properly secure them.
- Take the biggest coil and fold it in half, Do the same for the other coils as well.
- After the coils are done, apply glue inside them and attach in order of size.
- Apply glue on the outside of the petal and bind the different colour strips around it.
- Put glue at its end to secure it.
- Follow these steps and make four more of these petals. We will need a total of five of these.
- Take the petals, apply glue on the sides of them to attach.
- The fourth flower will be formed!
These are some flower shapes of quilling. Commemorate them and apply them to your work!